Decoder compatibility list

This is a decoder compatibility list for the four best software types for the three types of PIC cards (single-PIC1684, PIC1684+2416 and double-PIC1684)

	Nordic 2.39 ("Old Nordic") - the software for a single one-PIC1684 card	Nordic Twins 3.11 and later - the software for two one-PIC1684 cards. Probably autoswitches on all decoders that it works on.	Multimac 2 - the software for Multimac2-cards (PIC1684 + 2416)	WGTBETA - the software for double-PIC1684 cards
Alba SAT 6600		Probably works.	Autoswitching!	Autoswitching?
Amstrad 600		Probably works.	If the MM2 card has C4 and C8 connected, they probably must be sealed with tape before use.	Probably works.
Amstrad SMD 560	Probably works.	Probably works.	Probably works, but if the MM2 card has C4 and C8 connected, they must be sealed with tape before use.	Probably works.
Amstrad SRD 510			Probably works, but if the MM2 card has C4 and C8 connected, they must be sealed with tape before use.
Amstrad SRD 850			If the MM2 card has C4 and C8 connected, they must be sealed with tape before use.
Amstrad SRD 650			If the MM2 card has C4 and C8 connected, C4 must be sealed with tape before use.
Barcom Panda
Barcom 5924				Probably works.
Barcom MAC3 (5905/5914?)	Perhaps not?	No remoteupdate? Autoswitching!		Probably works.
Cambridge ARX 2009				Probably works.
Echostar SR8700 / Echostar LT8700		Autoswitching!	If the MM2 card has C4 and C8 connected, perhaps they must be sealed with tape before use.
Europlus (external decoder)			If the MM2 card has C4 and C8 connected, they must be sealed with tape before use.	Probably works.
Finlux SR5900S - same as Nokia SAT 8003 S	Probably works.		Probably works.	Probably works.
Force Macmaster 1000				Probably works.
Fuba 8003 S	Probably works.		Probably works.	Probably works.
Fuba MAC 300	Probably works.	Probably works.		Probably works.
Fuba MACV		Probably works.		Probably works.
Grundig STR 535 /N MAC	?	Locks when updating?	?
Grundig STR 707	(Loses data if card inserted when decoder is in standby mode?)	Probably works.		Probably works.
Grundig STR 635 MAC	Probably works.			Probably works.
Horizon	Probably works.		Might work.	Probably works.
Lenson Sat 203 (same as Triax and Cambridge)	No autoswitch? Remove & reinsert!			Probably works.
Lenson Sat 209	Probably works.		Might not work..?	Probably works.
Luxor MAC V / 8003			Doesn't autoswitch! Extra important that power-up timer is set correctly.
Luxor MAC 3 (also known as CS5904?)				Probably works.
Luxor MAC IV CS (also known as Luxor 5928)	Probably works.	Autoswitching!	Probably works.	Probably works.
Luxor STV970?	Probably works.	Probably works.	Doesn't work?	Probably works.
Luxor D2MAC-dekoder, old (6-7 years)	No autoswitching - must eject and reinsert card	Probably works.	Might not work.
Luxor 5904 with software version 7.03 and 5924 with software version 7.03	Probably works.		?	Probably works.
Luxor 6014
Luxor SAT 8003 S (same as Nokia SAT 8003 S)			Autoswitch doesn't work?
Luxor STM 970				Probably works.
Macab MAC-200 (external decoder)	Might not work?			Probably works.
Macab NRF 330	Probably works.			Probably works.
Macab NRF 500		Autoswitching!
Macab NRF 530	Probably works.	Autoswitching!		Probably works.
Macab NRF 550	Sometimes displays the error message "subscription not updated"	Probably works.	Probably works.	Probably works.
Macab NRF 560		Autoswitching!	Probably works.	Probably works.
Macab NRF 570		Autoswitching!	Doesn't support autoswitching - type 1117/2227!
Macab NRF 600	Old 2.36 didn't work. New versions probably do.	Probably works.	Autoswitching!	Probably works.
Macab NRF 660	Probably works.	Probably autoswitching.	Old versions of MM2 didn't work! MM215 and later works! Autoswitching!	Probably works.
Macab NRF 700		Autoswitching! Problems with remote updating?	Autoswitching!! MM214 works, MM215 doesn't???
Manhattan	Doesn't autoswitch?		Probably works.	Probably works.
Nokia MAC IV			(Card fucks up when switching from EC-S to EC-M channel?)	Probably works.
Nokia 2202 CS		Probably works.
Nokia 2102 CS	Probably works.	Probably works.
Nokia Sat 8003S	Doesn't autoswitch - remove and reinsert!	Autoswitching!	Autoswitching!	Old versions might not autoswitch - type 7777!
Nokia 9600		Probably works.	Might not work?	Probably works.
Nomex Mac 250 Multimac Receiver	Probably works.	Probably works.		Probably works.
Nomex/Origo Mac 150				Probably works.
Origo Mac 99	Autoswitching! Sometimes you need to remove & reinsert the card, or to turn off/on the decoder!
Origo Dec 300		Probably works.	Probably works.	Probably works.
Pace D150?	Probably works.	Probably works.	Probably works.	Probably works.
Pace D100?				Probably works.
Pace MSS 250	Probably works!		?
Pace MSS 260	Autoswitching!	Autoswitching!	Autoswitching!	?
Pace MS 400	Probably works!		Probably works!	Probably works!
Pace 500/Pace MSS 500
Pace MSS 561	No autoswitching?	Probably works.	Probably works.	Probably works.
Pace MRD 920		(Just ignore "hash error" when you remoteupdate!)		Probably works.
Pace MRD 950 (note: on Pace, CTV channels might not work unless you update the firmware inside the decoder!)			Probably works, but if the MM2 card has C4 and C8 connected, perhaps they must be sealed with tape before use.	Probably works.
Pace MRD 960 (note: on Pace, CTV channels might not work unless you update a chip in the decoder!)	Autoswitching!!	Autoswitching!	Autoswitching! If the MM2 card has C4 and C8 connected, perhaps they must be sealed with tape before use.
Pace MSS 1000	Probably works.	Probably works.	Autoswitching! If the MM2 card has C4 and C8 connected, perhaps they must be sealed with tape before use.	Probably works.
Philips STU 901 (and 902?)	?	Probably not. Might work for just a while.	(When remoteupdating, it asks you to enter each code twice!) Autoswitching in only one direction? If the MM2 card has C4 and C8 connected, they probably must be sealed with tape before use.
Philips CTU 900 (external decoder)			If the MM2 card has C4 and C8 connected, they must be sealed with tape before use.	Probably works.
Philips STU 904		No autoswitching?	If the MM2 card has C4 and C8 connected, they must be sealed with tape before use.	Probably works.
Philips STU 1400			If the MM2 card has C4 and C8 connected, they probably must be sealed with tape before use.	Probably works.
Philips STU 1300		Probably works.	Probably works. If the MM2 card has C4 and C8 connected, they probably must be sealed with tape before use.	Probably works.
Salora 5928 MAC4	Probably works.	Autoswitches?	Probably works.	Probably works.
Salora 5904 MAC3	Might need to turn decoder off to autoswitch!		MM215 works!
Tandberg 660	Probably works.		Probably doesn't work.	Probably works.
Tandberg TRS 5000	?	Probably works.	Probably doesn't work.	Probably works.
Thomson SRS4 IRD	Autoswitching. Remote update problems?	Probably works.
Triax Triasat SR4009	Probably works.	Problems with remote updating?	Problems with remote updating?	Probably works.
Triax Triasat SR4002		Probably works.	Probably works.	Probably works.
Triax Triasat SR4003			Problems with remote updating?	Probably works.
Triax Triasat SR4005	Problems with remoteupdating?		(Extra important that power-up timer is set correctly!)	Probably works.
Triax Triasat SR4007	Autoswitching?	Autoswitching?	Problems with remote updating? Doesnt autoswitch?
Uniden UST 92	Probably works.	Probably works.		Probably works.

Which type of PIC card should I use on my decoder?