F@milyNet aka Book PC aka HTPCi810 aka ......


Efter som jag sitter på en sådan så vill jag inte ge upp idé med att göra den till en HTPC

Moderkortet heter BKi810E eller HTPCi810 och tillverkades av Amptron
versionen det handlar om är v3.3A finns dock en version 1.6 samt 3.3
Bild på version 1.6 och 3.3

http://www.amptron.com/html/htpci810s.html (Bilden är tyvärr ändå på en v1.6, 3.3)
det som skiljer v3.3A och v1.6, 3.3 är en annan plaseringar av prossesor mm
Se nedan




FEATURES:
Main Chipset
Intel 82810 (810)

Integrated 82810 (GMCH) Graphics Memory Controller Hub using Direct AGP for vivid 2D/3D graphics.
Integrated Hardware Motion Compensation to improve software DVD video quality with digital video output.
Intel Dynamic Video Memory Technology (DVMT) provides advanced memory management and performance for Direct AGP
Integrated AC'97 compliant controller, EIDE controllers and dual USB ports. Improves sound and modem function by reusing existing resources.
82802 Firmware Hub (FWH) stores system BIOS and video, eliminating a redundant nonvolatile memory component. The 82802 also includes a hardware Random Number Generator (RNG) which improves security options and provide improved encryption.
ATA/33 (UDMA/33) support

Onboard TV Encoder
Chrontel CH7007A

PC 99 compliant
Universal digital interface accepts YcrCb (CCIR656) or RGB (15,16 or 24-bit multiplexed) video data in both interlaced and non-interlaced formats
TrueScale rendering engine supports underscan operations for various graphics resolutions.
Supports NTSC, NTSC-EIA (Japan) and PAL (B, D, G, H, I, M and N) TV formats.
Provides composite and SCART outputs
Auto-detection of TV presence
9-bit video DAC outputs

Onboard Modem
PCTel HSP56 MicroModem v3.03

Dual mode V.90/56Kflex support
PCI v2.2 compliant interface.
ACPI supports 'On Now'
Optional support for Caller ID
On Chip PnP logic
PC 97 & 99 compliant
Supports Windows 95/98/NT/2000 and Linux
Supports V.90, V.34, V.32, V32bis, V.22 and V.22bis protocols

Onboard Sound
C-Media CMI8738

HRTF-based 3D position audio supporting DirectSound 3D and A3D interface.
Supports rear side speakers, C3DX positional audio in 4-channel speaker mode.
Legacy SoundBlaster 16 compatible.
Downloadable DLS-based WaveTable music synthesizer with DirectMusic support.
Professional digital audio interface supporting 24-bit SPDIF input and output in both 44.1KHz and 48KHz formats.
Built-in 32ohm earphone buffer.
Built-in PCTel HSP56 Modem interface.
Drivers support AC3 5.1 channel interface.
MPU-401 port.
16-bit full duplex CODEC for playback and recording.
4-channel 16-bit DAC
32-bit PCI bus master

Onboard LAN Adapter
SiS SiS900 PCI Fast Ethernet

PCI specification revision 2.1 compliant
32-bit glueless PCI host interface
Plug and Play compatible
Supports PCI clock frequency from DC to 33 MHz independent of network clock
Supports network operation with PCI clock from 25Mhz to 33Mhz
Supports both +3.3v and +5v PCI signaling
High-performance 32-bit PCI bus master architecture with an integrated Direct
IEEE 802.3u 100Base-TX and 802.3u 10Base-T compliant
IEEE 802.3u Auto Negotiation and Parallel detection for automatic speed
Full duplex and half duplex mode for both 10 and 100 Mbps.

Onboard I/O Ports
External Ports
(1) Parallel port which supports EPP and ECP modes
(2) USB ports
(2) PS/2 ports
(1) 15-pin VGA port
All ports are PC 99 compliant for easy identification

Internal Ports
(1) Primary EIDE controller with support for two UltraDMA 33 devices
(1) Floppy drive controller with support for up to two drives
(1) SPDIF digital audio connector

Memory Support
(2) 168-pin DIMM slots for 3.3v SDRAM modules
Supports a maximum of 512MB RAM

Processor Support
will support Celeron CPUs @ 66MHz FSB and FC-PPGA ( Corpermine) CPUs @ 100MHz FSB

JUMPER SETTINGS AND HEADER PIN-OUTS

JUMPER PIN(s) FUNCTION   JUMPER PIN(s) FUNCTION
JP2 - Battery Controller 1-2 Battery On   JP3 - Clear CMOS 1-2 Normal Operation
  2-3 Battery Off     2-3 Clear CMOS
             
JP7 - TV Settings 1-2 SCART TV Mode   JP8 - CPU Type Select 1-2 Celeron CPUs
  2-3 NTSC TV Mode     2-3 FC-PGA CPUs
             
JP11 - CPU BUS Speed 1-2 133MHz (i810E Only)   JP1 - Modem DAA Conn. 1 Ground
  2-3 66/100MHz     2 AFEM CLK
          3 Ground
PANEL1 - Front Panel 1 Ground     4 HSPFS
  2 Power Supp     5 Ground
  3 Ground     6 MS CLK
  4 Reset     7 PVCC3
  5 Ground     8 PRING
  6 Power LED     9 Off Hook
  7 HDD LED     10 GPIOX
  8 Vcc     11 RIN
  9 Suspend LED (-)     12 HSPSDO
  10 Suspend LED (+)     13 5vSB
          14 HSPSDI
J11 - SPDIF Input 1 SPDIF In     15 Mute
  2 Ground     16 AFERET
             
J4 - SPDIF Output 1 12v   J3 - CD-ROM Audio 1 Left Channel
  2 Not Used     2 Right Channel
  3 SPDIF In     3 Ground
  4 Ground     4 Ground
  5 SPDIF Out        
  6 Speaker Out   Power Connector 1 5v SB
          2 Ground
          3 Ground
          4 PS-ON#
          5 +12v
          6 +12v


Drivers

http://www.amptron.com/asp/driverslist.asp?name=BKi810
http://www.amptron.com/html/drivers1.html#BKI810

Guldgruva

http://www.tadachi-net.com/desktop_pc/bki810/




Information för att använda ATX PSU till F@milyNet

ATX power source connector (20pin) pin assign

Pin number Signal name Pin number Signal name
1 +3.3 [ V ] 11 +3.3 [ V ]
2 +3.3 [ V ] 12 -12 [ V ]
3 COM 13 COM
4 +5 [ V ] 14 PS_ON
5 COM 15 COM
6 +5 [ V ] 16 COM
7 COM 17 COM
8 P_OK 18 -5 [ V ]
9 +5VSB 19 +5 [ V ]
10 +12 [ V ] 20 +5 [ V ]

* ' The COM ' in the chart 0 [ we point to V ], the GND (the gland) with in the same sense.


In ATX Ver 2.01 specification color of wiring

Electrical / signal name
Color of wiring
+3.3 [ V ] Orange
+5 [ V ]
Red
+12 [ V ] Yellow
COM Black
-5 [ V ] White
-12 [ V ] Blue
PS-ON Green
POK Gray

Color classification method of this wiring to the last is specification with of ATX Ver 2.01. Because of that, with a some reason, depending upon the manufacturer being able to meet, when you use the color which differs, it is. The case where you connect with the power source connector of the BKi810, please do not rely on the color of wiring verify Pin number and make sure to connect excessively.


Power source connector for BKi810 (6pin) pin assign

Pin number Signal name Pin number Signal name
1 +5VSB 4 PS-ON
2 COM 5 +12 [ V ]
3 COM 6 +12 [ V